How to install a flexi tank in the right way – Bulk Liquid Transport
What is a Flexi tank
Flexitank / Flexi tank container is a tight sealed, Flexible bag/bladder that is stuffed in a very 20ft container, and then use cardboard boxes to lean on the sides of the container and put it on the floor, to contain the bulk liquid product bag. The flexitank’s size / volume will range between from 16.000 liters to 24.000 liters.
How long does it take to filling into the flexitank?
Installation of Flexitank within the container takes regarding 20 to 30 minutes, when that it’s prepared for filling the liquid product that takes another regarding 30-40 minutes. when filling the liquid product the container together with your product is prepared to be shipped. The containers are often transported by road, railway or ocean. The container together with your liquid products are often delivered to any purpose worldwide. in place of destination you or your Consignee/Receivers will unload a product quickly and with none losses, by using simply the pump. Usually flexitanks is disposable and might be recycled.
Advantages of using Flexi tank
using flexitank can reduce expenses for transportation,Compare with tank-container you will pay just for one way freight of the 20-foot container. no need to return container charge.
In comparison with cost of drums or other capacities you save about 30-40%.
save up to 90% of time for stuffing/unstuffing of the cargo.
No need to clean Flexitank after transportation as it is disposable.
Hold more products, compare with the standard packaging as drums, canisters and bottles– volume can be up to 30%.
FlexiTank/Flexi tank Container installation Process Video
How to install flexitank to a container, see below video, you will totally to operate that.
The FlexiTank / flexi tank installation guide manual Process
How to install flexitank to a container, see below guide, you will totally to operate that.
Step1: inspect and clean the container carefully
Step2: put corrugated paper
Step3: put flexitank in a container and unfold flexitank
Step4: place steel bar
Step5: fix bulkhead
Step6: Close the left door and attach caution label
Step7: Start loading
Step8: Finish loading,close valve and fasten sock, close the other side